Short answer
Brush plating (also called selective plating, pen plating or tankless plating) is a form of electroplating where the plating solution is held in an absorbent tip on the positive lead of a DC power supply, and the part is connected to the negative lead. Metal deposits only where the tip touches, so you can plate a connector, pad or worn spot in place with no tank, no masking and no bath to dispose of.
How brush plating works
Tank plating and brush plating use the same chemistry: a DC current drives metal ions out of solution and onto a conductive part. In a tank, the whole part sits in the bath. In brush plating, the solution is carried in a tip and only the area under the tip is plated.
Connect the part to the negative (−) lead of the power supply and the pen to the positive (+) lead. Hold the pen so the whole tip touches the surface, and move it lightly back and forth in a slow stroke.
- 01
Degrease
Clean the work area with the Absorbent / Degreaser pen at 10 to 12V (stainless steel gets the Stainless Steel Degreaser pen). Wipe clean.
- 02
Build the base layer if the finish needs one
Flash copper on steel, brass or zinc die-cast, then nickel if the final finish is gold, rhodium or palladium. Wipe clean between pens.
- 03
Plate the finish
Run the finish pen at its catalog voltage with light, even strokes. More passes build more thickness.
- 04
Wipe clean
Wipe the plated area with a clean cloth. The part is ready to use.
What you can brush plate
The Micro-Metallizer line covers 16 pens: gold (24K, 18K, 14K), silver, nickel, black nickel, copper, tin, zinc, rhodium, palladium, chrome color, heavy-duty versions of the most-used metals, and two prep pens. One power supply runs all of them.
| Pen | Catalog no. | Voltage (DC) | Plates over |
|---|---|---|---|
| Absorbent / Degreaser | PL-1002 | 10 to 12V | Cleans all metals except stainless steel |
| Stainless Steel Degreaser | PL-1014 | 10 to 12V | Cleans and activates stainless steel |
| Gold 24K / 18K / 14K | PL-1003 / 1004 / 1005 | 6 to 8V | Gold, nickel, silver |
| Gold 24K / 18K Heavy | PL-1016 / 1017 | 6 to 8V | Gold, nickel, silver |
| Nickel | PL-1006 | 5 to 6V | Copper (copper flash other metals first) |
| Nickel Heavy | PL-1020 | 5 to 6V | Copper (copper flash other metals first) |
| Black Nickel | PL-1007 | 8 to 10V | Copper (copper flash other metals first) |
| Silver | PL-1008 | 5 to 6V | Any metal except aluminum or chromium |
| Silver Heavy | PL-1018 | 5 to 6V | Any metal except aluminum or chromium |
| Copper | PL-1010 | 6 to 8V | Any metal except aluminum or chromium |
| Copper Heavy | PL-1019 | 6 to 8V | Any metal except aluminum or chromium |
| Tin | PL-1012 | 6 to 8V | Any metal except aluminum or chromium |
| Zinc | PL-1013 | 6 to 8V | Any metal except aluminum or chromium |
| Chrome Color | PL-1009 | 6 to 8V | Copper (copper flash other metals first) |
| Rhodium | PL-1011 | 8 to 10V | Nickel (copper, then nickel, on other metals) |
| Palladium | PL-1015 | 6 to 8V | Nickel (copper, then nickel, on other metals) |
How thick brush plating goes
Standard pens build 1.5 to 1.8 µm. Heavy-duty pens build 3 to 3.6 µm. Thickness depends on time under the tip, so you control it by the number of passes.
| Pen type | 2 minutes | 3 minutes |
|---|---|---|
| Gold | 0.5 µm | 0.8 µm |
| Palladium | 0.5 µm | 0.8 µm |
| Silver | 0.5 µm | 0.8 µm |
| Rhodium | 0.7 µm | 1.0 µm |
| Nickel | 0.4 µm | 0.6 µm |
| Black Nickel | 0.5 µm | 0.6 µm |
| Copper, Zinc, Tin, Chrome Color | 0.3 µm | 0.5 µm |
| Gold Heavy | 0.8 µm | 1.2 µm |
| Silver Heavy | 0.8 µm | 1.2 µm |
| Copper Heavy | 0.6 µm | 1.0 µm |
| Nickel Heavy | 0.8 µm | 1.2 µm |
Brush plating equipment
A brush plating setup is three things: a variable DC power supply, connector cables, and the plating pens. Each pen is a sealed cartridge holding 10 ml of concentrated solution, enough for roughly 300 square inches. There is no bath chemistry to mix, maintain or dispose of.
| Item | Catalog no. | What it includes | Price |
|---|---|---|---|
| Contact Repair Kit | PL-1000C | Power supply, cables, gold, nickel and prep pens for contact work | $400 |
| Contact Repair Kit (Heavy Duty) | PL-1000CHD | Contact Repair Kit with heavy-duty pens | $525 |
| Deluxe Kit | PL-1000K | Power supply, cables and 6 pens | $540 |
| Deluxe Kit (Heavy Duty) | PL-1000HD | Power supply, cables and 6 heavy-duty pens | $900 |
| Power Supply | PL-1000 | Variable DC supply, 110V/60Hz or 220V/50Hz | $220 |
| Individual pens | PL-1002 to PL-1020 | One metal or prep step per pen | $65 to $310 |
Every pen and kit ships same day from New Jersey on orders placed by 2 PM ET on business days.
Where brush plating is used
- Restoring gold on worn connector pins, edge connectors and PCB gold fingers
- Re-tinning oxidized PCB pads so they take solder again
- Zinc touch-up on scratched or rusted plated steel
- Silver on electrical contacts and bus bars
- Nickel and copper underlayers before a final finish
- Rhodium or palladium on high-wear contact surfaces
- Prototype and field work where a tank line is not practical
Brush plating vs tank plating
Brush plating wins when you need a finish on part of a part, need it in place, or need it today. Tank plating wins when you need the whole part covered, deposits thicker than a few microns, or thousands of parts a day. Many shops use both: a plating line for production and a brush plating kit for repair, rework and touch-up.
Frequently asked questions
What is brush plating?
Brush plating is electroplating done with a solution-soaked tip instead of a tank. The part is connected to the negative lead of a DC supply, the tip to the positive lead, and metal deposits wherever the tip touches.
What else is brush plating called?
Selective plating, selective brush plating, brush electroplating, pen plating, spot plating and tankless plating all describe the same process.
How long does a brush plating pen last?
Each Micro-Metallizer pen holds 10 ml of solution and covers roughly 300 square inches.
What voltage is used for brush plating?
It depends on the metal. Degreasing runs at 10 to 12V, nickel and silver at 5 to 6V, gold, copper, tin and zinc at 6 to 8V, and rhodium and black nickel at 8 to 10V.
Can you brush plate nickel?
Yes. The Nickel pen (PL-1006) and Nickel Heavy Duty pen (PL-1020) plate over copper at 5 to 6V. Flash copper first on steel, brass and other metals.
Can you brush plate aluminum?
Not with the Micro-Metallizer system. Contact Hunter Products to discuss aluminum parts.
How much does brush plating equipment cost?
A complete Micro-Metallizer kit starts at $400 (Contact Repair Kit). The power supply alone is $220 and pens run $65 to $310.
Not sure which pens your part needs?
Tell us the substrate and the finish you need. Our team will tell you the sequence.